+38 (050) 777 09 90

  1. Coal and coal briquettes
    1. Coal (Rock coal, Steam coal)
    2. Bituminous coal (brown coal)
    3. Coal anthracite
    4. Eco-pea coal
    5. Ordinary coal (0-300 mm)
    6. Anthracite Briquette
    7. Fuel Briquettes and Pellets
    8. Fuel Pellets
    9. Charcoal briquettes and pellets
    10. About coals
    11. Make an order
  2. Сharcoal
    1. Charcoal
    2. Wood Charcoal Briquette
    3. Pyrolysis biocoal (biochar)
    4. Charcoal for Hookahs
  3. Equipment For Drying
    1. Infrared dryer
    2. Conveyor Dryer
    3. Infrared drying cabinet
    4. Convection Drying Oven
    5. Tunnel dryer on solid fuels
    6. Tunnel infrared sterilizer
    7. Dryer aerodynamic
    8. Chamber furnace
    9. Continuous Carbonization Furnace
    10. Charcoal furnace
    11. Сушилка шнековая
  4. Briquetting Presses
    1. Extruding machine
    2. Roller Press, Briquetting
    3. Hydraulic press
    4. Impact mechanical machine
    5. Granulator flat matrix
    6. Press for Briquettes of Pini&Kay Standard
    7. Auger Feed Granulator
    8. Roller granulator
    9. Rotary press for briquetting
  5. Dehydration and separation equipment
    1. Auger Desiccator (dehydrator)
  6. Equipment For Crushing
    1. Rotary crusher
    2. Hammer crusher
    3. Deck Hammer Crusher
    4. Roller crusher
    5. Shredder
    6. Wood shredder (Wood chipper)
    7. Сhaff-cutter
  7. Conveyors
    1. Conveyor for cooling
    2. Conveyor with band
  8. Equipment for briquetting
    1. Equipment for the production of briquette
    2. Equipment for the briqueting of pulverized coal (coal dust)
    3. Equipment for briquetting of sawdust and bio-fuels
    4. Equipment for briquetting of charcoal
    5. Equipment for processing of manure
  9. Optional equipment
    1. Forced Action Mixer
    2. Flexible Bolt Coupling
    3. SCREWS. MANUFACTURE OF SCREWS.
    4. Forming Rolls (bandages)
    5. Binder for briquettes
  10. Food equipment
    1. Infrared Drying
    2. Convection Drying Oven
    3. Infrared Drying Cabinet
    4. Industrial Juicer
    5. Industrial Washing Machine For Vegetables And Fruits
Rotary crusher

drobilkaOur company manufactures modifications crushers rotary - rotary toothed crusher. In this crusher on the main operating member - rigidly fixed toothed rotor segments uniformly distributed over the entire surface of the rotor in a certain order. All toothed segments at the ends have soldering of high-strength alloy. That increases their resistance to wear and, accordingly, the service, and also allows you to work with high hardness materials. Size, number of toothed segments, frequency and the order of their location on the rotor can be pre-lay a fraction the size of the processed material crushing and, ultimately, the performance of the device. On the performance of the installed capacity of the engine is also affected directly and volume of the working chamber.

The most widespread use of our mills are a part of the crushing and sorting complex in the beneficiation of coal mining and coal separation into fractions. But often they are used for grinding any other lumpy materials and sedimentary rocks, such as limestone, fire clay, feldspar, shales. Effective are also at crushing of construction waste, broken bricks, limestone, tiles, breeze blocks, foam concrete and concrete rubble.

The efficiency of the toothed crushers depends on the fragility of the material being processed, because the action of the crusher of this construction principle is to blow the material crushing or bending of the toothed rotor and between casing and abrasion and crushing. At the same time capture the pieces takes place at a rate of 1.5-4 times smaller than the diameter of the roll.

 

 Technical data

   

MODEL                                       

RC-2-650  

RC-2-850  

1.

Number of shaftsRC-2-850RC-2-650

2

2

2.

Number of crusher teeth

160

220

3.

Diameter of roller, mm

325

325

4.

Width of the roller, mm

650

850

5.

Motor power, kWt

2х18,5

2х22

6.

Engine rotor speed, rot/min

1500

1500

7.

Gearbox

C2U250-31,5

C2U350-31,5

8

Output size, mm

20-60

20-60

9.

Overall demensions, length x width x haigth, mm

2500х1500х2100

3200х1750х2200

10.

Mass, kg

2000

2750

Price list