+38 (050) 777 09 90

  1. Coal and coal briquettes
    1. Coal (Rock coal, Steam coal)
    2. Bituminous coal (brown coal)
    3. Coal anthracite
    4. Eco-pea coal
    5. Ordinary coal (0-300 mm)
    6. Anthracite Briquette
    7. Fuel Briquettes and Pellets
    8. Fuel Pellets
    9. Charcoal briquettes and pellets
    10. About coals
    11. Make an order
  2. Сharcoal
    1. Charcoal
    2. Wood Charcoal Briquette
    3. Pyrolysis biocoal (biochar)
    4. Charcoal for Hookahs
  3. Equipment For Drying
    1. Infrared dryer
    2. Conveyor Dryer
    3. Infrared drying cabinet
    4. Convection Drying Oven
    5. Tunnel dryer on solid fuels
    6. Tunnel infrared sterilizer
    7. Dryer aerodynamic
    8. Chamber furnace
    9. Continuous Carbonization Furnace
    10. Charcoal furnace
    11. Сушилка шнековая
  4. Briquetting Presses
    1. Extruding machine
    2. Roller Press, Briquetting
    3. Hydraulic press
    4. Impact mechanical machine
    5. Granulator flat matrix
    6. Press for Briquettes of Pini&Kay Standard
    7. Auger Feed Granulator
    8. Roller granulator
    9. Rotary press for briquetting
  5. Dehydration and separation equipment
    1. Auger Desiccator (dehydrator)
  6. Equipment For Crushing
    1. Rotary crusher
    2. Hammer crusher
    3. Deck Hammer Crusher
    4. Roller crusher
    5. Shredder
    6. Wood shredder (Wood chipper)
    7. Сhaff-cutter
  7. Conveyors
    1. Conveyor for cooling
    2. Conveyor with band
  8. Equipment for briquetting
    1. Equipment for the production of briquette
    2. Equipment for the briqueting of pulverized coal (coal dust)
    3. Equipment for briquetting of sawdust and bio-fuels
    4. Equipment for briquetting of charcoal
    5. Equipment for processing of manure
  9. Optional equipment
    1. Forced Action Mixer
    2. Flexible Bolt Coupling
    4. Forming Rolls (bandages)
    5. Binder for briquettes
  10. Food equipment
    1. Infrared Drying
    2. Convection Drying Oven
    3. Infrared Drying Cabinet
    4. Industrial Juicer
    5. Industrial Washing Machine For Vegetables And Fruits
Rotary press for briquetting

Our company offers a new unit of equipment - rotary press for briquette production. The rotary press allows making briquettes from any kind of coal dust. It is possible to make briquettes from charcoal, coal, carbonized Bio charcoal obtained from burnt coconut and walnut shells or from carbonized straw, sunflower husks and other agricultural waste. The rotary press is often used for pressing hookah charcoal. In addition to making briquettes, rotary presses of a special design are used to obtain pressed products in the chemical, food and pharmaceutical industries. The rotary press provides stable operation when using fine coal and dust of fraction 0 - 5 mm at a humidity of 12% - 14%. The shape and size of the bracket depends on the matrices used and can be different: round, hexagonal, square, etc. It is possible to produce a briquette with one or more holes. On a rotary press, briquettes of the pini-kay standard of various shapes, with a hole in the middle, or briquettes in the form of flat tablets of various shapes and sizes with a hole or several holes can be produced to improve the combustion characteristics of the resulting briquette. The rotary press is economical and easy to repair and operate, does not require highly skilled labor, large production facilities and energy consumption. At the same time, it reliably meets the production needs for charcoal briquettes.


The technical parameters rotary press:


The technical parameters *

Number of cycles per min.

Engine power, kWt

Dimensions, mm

The weight, т

РП 10

Briquette diameter  Ø 100 mm
Briquette height  80 mm
Number of holes  16 шт.
Ø Hole  14-16мм

55 cycles per minute 7,5 1300х1220х1700 1,5
РП 12 Briquette diameter  Ø 120мм
Briquette height  80 mm
Number of holes  19 шт.
Ø Hole 14-16мм
50 cycles per minute 7,5 1500х1280х1860 1,8
РП 16 Диаметр брикета Ø 150мм
Briquette height  90 mm
Number of holes  19 pcs.
Ø Hole  14-16 mm
40 cycles per minute 11,2 1760х1400х2050 2

* The technical parameters of the briquette can be changed by agreement with the customer of the equipment.

It is possible to manufacture molds for the production of Pini Kay briquettes, with one hole in the middle and a custom briquette profile.